Escea IB600 Wartungshandbuch PDF herunterladen (Seite 7)

G8872_1 Installation Manual AUS

Removing or Cleaning Fan

As part of regular service procedure, it is recommended that the fan is removed for cleaning.

Dust will build up on the fan rotor and in the cavity where the fan is located. This can be removed

by the service person using a vacuum cleaner.

Step One:

ISOLATE THE POWER TO

THE FIRE BEFORE PROCEEDURE

Remove front glass and

log set as described on

page 5.

Step Two:

Remove fire box from

heater by taking out the

screws from each corner

and Pulling fire directly

outwards

(as shown).

Step Three:

Take out the 7 screws

on top of fan box unit

Step Four:

Lift the fan unit up and

out as far as the wires

will allow. Unplug wires to

fully remove fan assembly.

Step Five:

Clean fans, removing all dust build up.

Replace fans and fire box.

Remove screws from

each corner of firebox

Pull firebox out

Pull u

and outwards

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Escea IB600 Wartungshandbuch Seite 7